后入内射欧美99二区视频,爽爽亚洲,欧美日韩国产一区二区三区在线观看

Makrolon? 2407

Manufacturer: Covestro
Produced At: Europe / China
Product Category: Polycarbonate（PC）
Product No: Makrolon 2407
Product Quantity: 25KG / BAG
Product Features: Good Mold Release、Low Viscosity、UV Stabilized

Product information

Makrolon? 2407

Polycarbonate

Covestro - Polycarbonates

Product Description:

MVR (300 °C/1.2 kg) 19 cm3/10 min; general purpose; low viscosity; UV stabilized; easy release; injection molding - melt temperature 280 - 320 °C; available in transparent, translucent and opaque colors

Additive	UV Stabilizer
Features	General Purpose，Good Mold Release，Low Viscosity
Uses	General Purpose
RoHS Compliance	RoHS Compliant
Appearance	Clear/Transparent，Colors Available，Opaque，Translucent
Processing Method	Injection Molding
Multi-Point Data	Creep Modulus vs. Time (ISO 11403-1) Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Specific Volume vs Temperature (ISO 11403-2) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density (73°F)	1.20	g/cm3	ISO 1183
Apparent (Bulk) Density 3	0.66	g/cm3	ISO 60
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)	20	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (300°C/1.2 kg)	1.16	in3/10min	ISO 1133
Molding Shrinkage
Across Flow	0.50 to 0.70	%	ISO 2577
Flow	0.50 to 0.70	%	ISO 2577
Across Flow : 0.0787 in 4	0.70	%	ISO 294-4
Flow : 0.0787 in 4	0.65	%	ISO 294-4
Water Absorption			ISO 62
Saturation, 73°F	0.30	%
Equilibrium, 73°F, 50% RH	0.12	%
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness	16800	psi	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)	348000	psi	ISO 527-2/1
Tensile Stress			ISO 527-2/50
Yield, 73°F	9570	psi
Break, 73°F	9430	psi
Tensile Strain			ISO 527-2/50
Yield, 73°F	6.0	%
Break, 73°F	120	%
Nominal Tensile Strain at Break (73°F)	> 50	%	ISO 527-2/50
Tensile Creep Modulus			ISO 899-1
1 hr	319000	psi
1000 hr	276000	psi
Flexural Modulus 5 (73°F)	341000	psi	ISO 178
Flexural Stress 5			ISO 178
73°F	14200	psi
3.5% Strain, 73°F	10700	psi
Flexural Strain at Flexural Strength 6 (73°F)	7.0	%	ISO 178
Films	Nominal Value	Unit	Test Method
Water Vapor Transmission Rate (73°F, 85% RH, 3.9 mil)	0.97	g/100 in2/24 hr	ISO 15106-1
Gas Permeation			ISO 2556
Carbon Dioxide : 73°F, 1.0 mil	18900	cm3/m2/bar/24 hr
Carbon Dioxide : 73°F, 3.9 mil	4800	cm3/m2/bar/24 hr
Nitrogen : 73°F, 1.0 mil	630	cm3/m2/bar/24 hr
Nitrogen : 73°F, 3.9 mil	160	cm3/m2/bar/24 hr
Oxygen : 73°F, 1.0 mil	3150	cm3/m2/bar/24 hr
Oxygen : 73°F, 3.9 mil	800	cm3/m2/bar/24 hr
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength 7			ISO 7391
-22°F, Complete Break	6.7	ft·lb/in2
73°F, Partial Break	31	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-76°F	No Break
-22°F	No Break
73°F	No Break
Notched Izod Impact Strength 8			ISO 7391
-22°F, Complete Break	5.7	ft·lb/in2
73°F, Partial Break	31	ft·lb/in2
Multi-Axial Instrumented Impact Energy			ISO 6603-2
-22°F	47.9	ft·lb
73°F	40.6	ft·lb
Multi-Axial Instrumented Impact Peak Force			ISO 6603-2
-22°F	1350	lbf
73°F	1150	lbf

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	277	°F	ISO 75-2/B
264 psi, Unannealed	255	°F	ISO 75-2/A
Glass Transition Temperature 9	289	°F	ISO 11357-2
Vicat Softening Temperature
--	289	°F	ISO 306/B50
--	293	°F	ISO 306/B120
Ball Pressure Test (275°F)	Pass		IEC 60695-10-2
CLTE			ISO 11359-2
Flow : 73 to 131°F	3.6E-5	in/in/°F
Transverse : 73 to 131°F	3.6E-5	in/in/°F
Thermal Conductivity 10 (73°F)	1.4	Btu·in/hr/ft2/°F	ISO 8302
RTI Elec (0.06 in)	257	°F	UL 746
RTI Imp (0.06 in)	239	°F	UL 746
RTI Str (0.06 in)	257	°F	UL 746

Products

Products

Makrolon? 2407

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service