女人色极品影院,欧美一级在线免费观看,欧美成人自拍

TRIREX? 3017PJ

Manufacturer: INEOS
Produced At: Korea / China
Product Category: PC
Product No: TRIREX 3017PJ
Product Quantity: 25KG / BAG
Product Features: Good Dimensional Stability，Good Electrical Properties，Good Flow，Low Moisture Absorption，Low Temperature Impact，Resistance，Low Viscosity，Weather Resistant

Product information

TRIREX? 3017PJ

Polycarbonate

Samyang Corporation

Product Description:

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries.

TRIREX 3017PJ is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property.

CHARACTERISTICS

Granule type

Superior low temperature impact resistance

Good flow-ability

Workable under a wide range of temperatures (-100 ? ~ 135 ?)

High electrical performance

Good dimensional stability

Low moisture absorbency

Good weather resistance

APPLICATIONS

TRIREX 3017PJ resin grade is designed for Compounding.

Ultra low viscosity. Transparent colors only.

Features	Good Dimensional Stability，Good Electrical Properties，Good Flow，Low Moisture Absorption，Low Temperature Impact Resistance，Low Viscosity，Weather Resistant
Uses	Appliances，Automotive Applications，Compounding，Electrical/Electronic Applications，Optical Applications
Appearance	Clear/Transparent
Forms	Granules
Processing Method	CompoundingInjection Molding

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	1.20		ASTM D792
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)	33	g/10 min	ASTM D1238
Molding Shrinkage - Flow (0.118 in)	5.0E-3 to 7.0E-3	in/in	ASTM D955
Water Absorption (24 hr, 73°F)	0.15	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	9570	psi	ASTM D638
Tensile Elongation (Break)	130	%	ASTM D638
Flexural Modulus	326000	psi	ASTM D790
Flexural Strength (Yield)	13100	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.125 in)	14	ft·lb/in	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)	271	°F	ASTM D648
CLTE - Flow	2.8E-5 to 3.9E-5	in/in/°F	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	4.0E+16	ohms·cm	ASTM D257
Dielectric Strength	760	V/mil	ASTM D149
Arc Resistance	120	sec	ASTM D495
Flammability	Nominal Value	Unit	Test Method
Flame Rating (0.06 in)	V-2		UL 94

Injection	Nominal Value	Unit
Drying Temperature	248	°F
Drying Time	3.0 to 5.0	hr
Suggested Max Moisture	0.020	%
Rear Temperature	455 to 500	°F
Middle Temperature	482 to 527	°F
Front Temperature	509 to 554	°F
Nozzle Temperature	509 to 572	°F
Processing (Melt) Temp	509 to 572	°F
Mold Temperature	149 to 221	°F
Back Pressure	36.3 to 102	psi
Screw Speed	40 to 70	rpm
Vent Depth	7.9E-4 to 3.1E-3	in

Products

Products

TRIREX? 3017PJ

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service