无码人妻一区二区三区免费,亚洲免费一级电影,午夜国产一级一片

Stanyl? TC551

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyamide 46（PA46）
Product No: Stanyl TC551
Product Quantity: 25KG / BAG
Product Features: Flame Retardant，Thermally Conductive

Product information

Stanyl? TC551

Polyamide 46

Product Description:

Thermal conductive material, Flame Retardant

Special Features:

Thermal conductive

Used In:

Heat Sinks in LED Lamps

Stanyl? is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Additive	Flame Retardant
Features	Flame Retardant、Thermally Conductive
Uses	LEDs
Processing Method	Injection Molding
Resin ID (ISO 1043)	PA46 FR(17)

Physical	Nominal Value	Unit	Test Method
Density	1.47	g/cm3	ISO 1183
Molding Shrinkage			ISO 294-4
Across Flow	1.0	%
Flow	0.60	%
Water Absorption			ISO 62
Saturation, 73°F	5.3	%
Equilibrium, 73°F, 50% RH	1.1	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1.32E+6	psi	ISO 527-2
Tensile Stress (Break)	7250	psi	ISO 527-2
Tensile Strain (Break)	0.60	%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength (73°F)	0.95	ft·lb/in2	ISO 179/1eU

Thermal	Nominal Value	Unit	Test Method
Thermal Conductivity			ASTM E1461
-- 3	15	Btu·in/hr/ft2/°F
-- 4	97	Btu·in/hr/ft2/°F
RTI Elec (0.030 in)	149	°F	UL 746

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+6	ohms·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Flammability Classification			IEC 60695-11-10, -20
0.030 in	V-0
0.06 in	V-0

Injection	Nominal Value	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	536 to 608	°F
Middle Temperature	572 to 608	°F
Front Temperature	572 to 608	°F
Nozzle Temperature	581 to 635	°F
Processing (Melt) Temp	581 to 617	°F
Mold Temperature	176 to 248	°F
Injection Rate	Moderate-Fast
Back Pressure	290 to 1450	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Stanyl? TC551

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service