Texin? 945 U
Thermoplastic Polyurethane Elastomer (Polyether)
Texin 945U resin is a polyether-based thermoplastic polyurethane with a Shore hardness of approximately 45D. It can be processed by injection molding, extrusion, or blow molding.
Additive | - Heat Stabilizer，UV Stabilizer
|
Features | |
Uses | - Cable Jacketing，F(xiàn)ootwear，Molded Ear Tags，Profiles，Seals，Sheet，Tubing
|
Agency Ratings | |
Appearance | |
Processing Method | - Blow Molding，Extrusion，Injection Molding
|
Density / Specific Gravity |
|
|
|
-- | 1.14 |
| ASTM D792 |
-- | 1.14 | g/cm3 | ISO 1183 |
Molding Shrinkage |
|
|
|
Flow : 0.100 in | 8.0E-3 | in/in | ASTM D955 |
Across Flow : 0.100 in | 8.0E-3 | in/in | ASTM D955 |
Across Flow : 0.100 in | 0.80 | % | ISO 2577 |
Flow : 0.100 in | 0.80 | % | ISO 2577 |
Durometer Hardness (Shore D) | 45 |
| ASTM D2240, ISO 868 |
Flexural Modulus |
|
| ASTM D790, ISO 178 |
73°F | 15000 | psi |
|
158°F | 5000 | psi |
|
Taber Abrasion Resistance |
|
|
|
1000 Cycles, 1000 g, H-18 Wheel | 60.0 | mg | ASTM D1044 |
1000 Cycles, 1000 g, H-18 Wheel | 60.0 | mg | ISO 4649 |
Tensile Stress |
|
| ASTM D412, ISO 37 |
50% Strain | 1410 | psi |
|
100% Strain | 1800 | psi |
|
300% Strain | 4000 | psi |
|
Tensile Strength (Yield) | 6700 | psi | ASTM D412, ISO 37 |
Tensile Elongation (Break) | 400 | % | ASTM D412, ISO 37 |
Tear Strength |
|
|
|
-- 2 | 725 | lbf/in | ASTM D624 |
-- | 730 | lbf/in | ISO 34-1 |
Compression Set |
|
| ASTM D395B, ISO 815 |
73°F, 22 hr | 22 | % |
|
73°F, 22 hr 3 | 20 | % |
|
158°F, 22 hr | 75 | % |
|
158°F, 22 hr 3 | 40 | % |
|
Bayshore Resilience | 35 | % | ASTM D2632 |
