欧美精品在线一区,清纯女高被日透了,91老司机在线

Arnite? T06 200 (extrusion)

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polybutylene Terephthalate（PBT）
Product No: Arnite? T06 200 (extrusion)
Product Quantity: 25KG / BAG
Product Features: Low Viscosity

Product information

Arnite? T06 200 (extrusion)

Polybutylene Terephthalate

Product Description:

Low Viscosity, Injection Molding, Extrusion

Special Features:

Low viscosity

Arnite? (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite? A (PET) and Arnite? T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite? is available including unreinforced, reinforced and flame retardant grades.

Features	Low Viscosity
Processing Method	Extrusion，Injection Molding
Resin ID (ISO 1043)	PBT

Physical	Nominal Value	Unit	Test Method
Density	1.30	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)	1.34	in3/10min	ISO 1133
Water Absorption			ISO 62
Saturation, 73°F	0.45	%
Equilibrium, 73°F, 50% RH	0.18	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	377000	psi	ISO 527-2
Tensile Stress (Yield)	7980	psi	ISO 527-2
Tensile Strain (Yield)	3.5	%	ISO 527-2
Nominal Tensile Strain at Break	> 50	%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	2.4	ft·lb/in2
73°F	2.4	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	No Break
73°F	No Break

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	329	°F	ISO 75-2/B
264 psi, Unannealed	131	°F	ISO 75-2/A
Melting Temperature 3	437	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	5.0E-5	in/in/°F
Transverse	5.0E-5	in/in/°F
Effective Thermal Diffusivity	4.65E-8	m2/s

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Electric Strength	690	V/mil	IEC 60243-1
Relative Permittivity			IEC 60250
100 Hz	3.50
1 MHz	3.20
Dissipation Factor			IEC 60250
100 Hz	2.0E-3
1 MHz	0.020
Comparative Tracking Index	600	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flammability Classification			IEC 60695-11-10, -20
0.030 in	HB
0.06 in	HB

Fill Analysis	Nominal Value	Unit	Test Method
Melt Density	1.04	g/cm3
Melt Thermal Conductivity	0.76	Btu·in/hr/ft2/°F
Specific Heat Capacity of Melt	0.540	Btu/lb/°F
Additional Information	Nominal Value	Unit	Test Method
RSV - m-cresol, 1g/100ml	2.10		Internal Method

Injection	Nominal Value	Unit
Drying Temperature	212 to 248	°F
Drying Time	3.0 to 12	hr
Rear Temperature	446 to 464	°F
Middle Temperature	446 to 482	°F
Front Temperature	464 to 500	°F
Nozzle Temperature	464 to 500	°F
Processing (Melt) Temp	464 to 518	°F
Mold Temperature	140 to 212	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Arnite? T06 200 (extrusion)

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service