毛片美女,欧美特一级,在线看的av网站

Arnite? TV4 461

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: PBT+PET
Product No: Arnite? TV4 461
Product Quantity: 25KG / BAG
Product Features: Additive Mold Release

Product information

Arnite? TV4 461

Polybutylene Terephthalate + PET

Product Description:

30% Glass Reinforced

Special Features:

Contains release agent

Used In:

Actuator Covers

Bezels and AFL Frames

Arnite? (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite? A (PET) and Arnite? T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite? is available including unreinforced, reinforced and flame retardant grades.

Filler / Reinforcement	Glass Fiber, 30% Filler by Weight
Additive	Mold Release
Uses	Protective Coverings
Processing Method	Injection Molding
Resin ID (ISO 1043)	(PBT+PET)-GF30

Physical	Nominal Value	Unit	Test Method
Density	1.53	g/cm3	ISO 1183
Molding Shrinkage			ISO 294-4
Across Flow	1.1	%
Flow	0.32	%
Water Absorption			ISO 62
Saturation, 73°F	0.30	%
Equilibrium, 73°F, 50% RH	0.15	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1.48E+6	psi	ISO 527-2
Tensile Stress (Break)	21000	psi	ISO 527-2
Tensile Strain (Break)	2.3	%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	4.3	ft·lb/in2
73°F	3.7	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	21	ft·lb/in2
73°F	27	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	437	°F	ISO 75-2/B
264 psi, Unannealed	401	°F	ISO 75-2/A
CLTE			ISO 11359-2
Flow	2.2E-5	in/in/°F
Transverse	3.3E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Relative Permittivity			IEC 60250
100 Hz	4.10
1 MHz	3.90
Dissipation Factor			IEC 60250
100 Hz	1.5E-3
1 MHz	0.016
Comparative Tracking Index	275	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flammability Classification (0.06 in)	HB		IEC 60695-11-10, -20

Injection	Nominal Value	Unit
Drying Temperature	212 to 248	°F
Drying Time	3.0 to 12	hr
Rear Temperature	464	°F
Middle Temperature	464 to 482	°F
Front Temperature	482 to 500	°F
Nozzle Temperature	482 to 500	°F
Processing (Melt) Temp	500 to 518	°F
Mold Temperature	140 to 212	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Arnite? TV4 461

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service