91中文视频,国产一区二区三区四区,av网站地址

<button id="aayw6"></button>

Ultramid? B3EG6

Manufacturer: BASF
Produced At: Europe / China
Product Category: Polyamide 6（PA6）
Product No: Ultramid B3EG6
Product Quantity: 25KG / BAG
Product Features: Oil Resistant

Product information

Ultramid? B3EG6

Polyamide 6

BASF Corporation

Product Description:

Ultramid B3EG6 is a 30% glass fiber reinforced injection molding PA6 grade.

Applications
Typical applications include industrial articles and electrical insulating parts.

Filler / Reinforcement	Glass Fiber, 30% Filler by Weight
Features	Oil Resistant
Uses	Electronic Insulation、Industrial Applications
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Creep Modulus vs. Time (ISO 11403-1) Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Dry	Conditioned	Unit	Test Method
Density / Specific Gravity
--	1.36	--		ASTM D792
--	1.36	--	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR)(275°C/5.0 kg)	3.05	--	in3/10min	ISO 1133
Molding Shrinkage - Flow (0.125 in)	3.0E-3	--	in/in
Water Absorption
Saturation	6.6	--	%	ASTM D570
Saturation, 73°F	6.6	--	%	ISO 62
Equilibrium, 50% RH	2.1	--	%	ASTM D570
Equilibrium, 73°F, 50% RH	2.1	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (73°F)	1.38E+6	899000	psi	ISO 527-2
Tensile Strength
Break, 73°F	24900	--	psi	ASTM D638
Break, 73°F	26800	16700	psi	ISO 527-2
Tensile Elongation
Break, 73°F	3.2	--	%	ASTM D638
Break, 73°F	3.5	8.0	%	ISO 527-2
Flexural Modulus
73°F	1.20E+6	--	psi	ASTM D790
73°F	1.25E+6	725000	psi	ISO 178
Flexural Stress (73°F)	39200	26100	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179
-22°F	5.2	--	ft·lb/in2
73°F	7.1	14	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179
-22°F	38	--	ft·lb/in2
73°F	45	52	ft·lb/in2
Notched Izod Impact
-40°F	1.8	--	ft·lb/in	ASTM D256
73°F	2.0	--	ft·lb/in	ASTM D256
73°F	7.1	9.5	ft·lb/in2	ISO 180

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed	428	--	°F	ASTM D648, ISO 75-2/B
264 psi, Unannealed	410	--	°F	ASTM D648, ISO 75-2/A
Peak Melting Temperature	428	--	°F	ASTM D3418, ISO 3146
CLTE
Flow	1.1E-5	--	in/in/°F	ASTM E831
Flow	1.3E-5	--	in/in/°F
Transverse	3.6E-5	--	in/in/°F
RTI Elec				UL 746
0.030 in	248	--	°F
0.06 in	248	--	°F
0.12 in	248	--	°F
RTI Imp				UL 746
0.06 in	203	--	°F
0.12 in	203	--	°F
RTI Str				UL 746
0.06 in	266	--	°F
0.12 in	266	--	°F

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity
0.0591 in	1.0E+15	1.0E+12	ohms·cm	ASTM D257
--	1.0E+15	1.0E+12	ohms·cm	IEC 60093
Dielectric Constant (1 MHz)	3.80	6.80		IEC 60250
Dissipation Factor				IEC 60250
100 Hz	0.023	0.22
1 MHz	0.023	0.22
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating				UL 94
0.06 in	HB	--
0.12 in	HB	--

Products

Products

Ultramid? B3EG6

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service