男人天堂a,中文字幕无码不卡在线,日韩中文字幕免费观看

Ultramid? B3S

Manufacturer: BASF
Produced At: Europe / China
Product Category: Polyamide 6（PA6）
Product No: Ultramid B3S
Product Quantity: 25KG / BAG
Product Features: Crystalline、Fast Molding Cycle、Good Flow、Oil Resistant

Product information

Ultramid? B3S

Polyamide 6

BASF Corporation

Product Description:

An easy flowing, finely crystalline injection moulding grade for very fast processing. Parts produced include thin-walled technical parts (eg housing, fittings, grips, small parts and fixing clamps).

Features	Crystalline、Fast Molding Cycle、Good Flow、Oil Resistant
Uses	Fittings、Housings、Thin-walled Parts
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density	1.13	--	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR)(275°C/5.0 kg)	9.76	--	in3/10min	ISO 1133
Molding Shrinkage				ISO 294-4
Across Flow	1.0	--	%
Flow	0.87	--	%
Water Absorption				ISO 62
Saturation, 73°F	9.0 to 10	--	%
Equilibrium, 73°F, 50% RH	2.6 to 3.4	--	%
Viscosity Number (96% H2SO4 (Sulphuric Acid))	145	--	cm3/g	ISO 307
Mold Shrinkage - constrained 3	0.55	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	508000	174000	psi	ISO 527-2
Tensile Stress (Yield)	13100	6530	psi	ISO 527-2/50
Tensile Strain (Yield)	4.0	20	%	ISO 527-2/50
Nominal Tensile Strain at Break	10	> 50	%	ISO 527-2/50
Tensile Creep Modulus 4 (1000 hr)	--	160000	psi	ISO 899-1
Flexural Modulus	435000	--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	1.4	--	ft·lb/in2
73°F	1.9	24	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	95	--	ft·lb/in2
73°F	120 ft·lb/in2	No Break
Notched Izod Impact Strength				ISO 180/A
-22°F	2.4	--	ft·lb/in2
73°F	2.4 ft·lb/in2	No Break

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	356	--	°F	ISO 75-2/B
264 psi, Unannealed	149	--	°F	ISO 75-2/A
Melting Temperature	428	--	°F	ISO 11357-3
CLTE - Flow (73 to 176°F)	3.9E-5 to 5.6E-5	--	in/in/°F	ISO 11359-2
Specific Heat	0.406	--	Btu/lb/°F
Thermal Conductivity	2.3	--	Btu·in/hr/ft2/°F	DIN 52612
Maximum Service Temperature - short cycle operation	356	--	°F
Temperature Index - at 50% loss of tensile strength				IEC 60216
-- 5	207	--	°F
-- 6	189	--	°F

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	--	1.0E+10	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+12	ohms·cm	IEC 60093
Relative Permittivity (1 MHz)	3.30	7.00		IEC 60250
Dissipation Factor (1 MHz)	0.030	0.30		IEC 60250
Comparative Tracking Index(Solution A)	600	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification (0.06 in)	V-2	--		IEC 60695-11-10, -20

Additional Information	Dry	Conditioned
Polymer Abbreviation	PA6	--

Products

Products

Ultramid? B3S

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service