亚洲人在线视频,女人扒开屁股让我添,久久这里只有精品6

Delrin? 100AL NC010

Manufacturer: Delrin
Produced At: Import/ China
Product Category: POM
Product No: Delrin? 100AL NC010
Product Quantity: 25KG / BAG
Product Features: High Viscosity，Homopolymer，Low Friction，Lubricated

Product information

Delrin? 100AL NC010

ACETAL RESIN

Product Description:

Lubricated High Viscosity Acetal Homopolymer with Low Wear and Low Friction

Additive	Lubricant，Mold Release
Features	High Viscosity，Homopolymer，Low Friction，Lubricated，Wear Resistant
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Extrusion，Injection Molding，Profile Extrusion，Sheet Extrusion
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Stress vs. Shear Rate (ISO 11403-1) Specific Volume vs Temperature (ISO 11403-2) Viscosity vs. Shear Rate (ISO 11403-2)
Part Marking Code (ISO 11469)	POM-S
Resin ID (ISO 1043)	POM-S

Physical	Nominal Value	Unit	Test Method
Density	1.40	g/cm3	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.5	g/10 min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.8	%
Flow	2.0	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	435000	psi	ISO 527-2
Tensile Stress (Yield)	10200	psi	ISO 527-2
Tensile Strain (Yield)	18	%	ISO 527-2
Nominal Tensile Strain at Break	45	%	ISO 527-2
Tensile Creep Modulus			ISO 899-1
1 hr	392000	psi
1000 hr	218000	psi
Flexural Modulus	406000	psi	ISO 178
Poisson's Ratio	0.37		ISO 527
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	3.3	ft·lb/in2
73°F	5.0	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	81	ft·lb/in2
73°F	120	ft·lb/in2
Notched Izod Impact Strength (73°F)	3.8	ft·lb/in2	ISO 180/1A

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	325	°F	ISO 75-2/B
264 psi, Unannealed	207	°F	ISO 75-2/A
Melting Temperature 3	352	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	6.1E-5	in/in/°F
Transverse	6.1E-5	in/in/°F
Annealing Temperature	320	°F
Annealing Time - Optional	30.0	min/mm

Flammability	Nominal Value	Unit	Test Method
Burning Rate 4 (0.0394 in)	1.0	in/min	ISO 3795
Flame Rating
0.031 in	HB		UL 94
0.06 in	HB		UL 94, IEC 60695-11-10, -20
0.03 in	HB		IEC 60695-11-10, -20
FMVSS Flammability	B		FMVSS 302

Additional Information	Nominal Value	Unit	Test Method
Emission	< 8.00	mg/kg	VDA 275

Injection	Nominal Value	Unit
Drying Temperature	176	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Suggested Max Moisture	0.20	%
Processing (Melt) Temp	410 to 428	°F
Melt Temperature, Optimum	419	°F
Mold Temperature	176 to 212	°F
Mold Temperature, Optimum	194	°F
Holding Pressure	13100 to 16000	psi
Drying Recommended	yes
Hold Pressure Time	8.00	s/mm

Extrusion	Nominal Value	Unit
Drying Temperature	167 to 185	°F
Drying Time	2.0 to 4.0	hr
Suggested Max Moisture	0.20	%
Melt Temperature	383 to 401	°F
Extrusion Melt Temperature, Optimum	392	°F

如需杜邦（DUPONT）原廠物性表及相關文件，請聯系我們工作人員，謝謝！

Products

Products

Delrin? 100AL NC010

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service