亚洲天堂精品视频,精品成在人线av无码免费看,乱人伦人妻精品一区二区

Delrin? 300TE BK602

Manufacturer: Delrin
Produced At: Import/ China
Product Category: POM
Product No: Delrin? 300TE BK602
Product Quantity: 25KG / BAG
Product Features: Homopolymer，Low Emissions，Medium-high Viscosity

Product information

Delrin? 300TE BK602

ACETAL RESIN

Product Description:

Toughened Medium-high Viscosity Acetal Homopolymer with Very Low Emissions

Additive	Lubricant,Mold Release
Features	Homopolymer,Low Emissions,Medium-high Viscosity
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	ExtrusionInjection MoldingProfile ExtrusionSheet Extrusion
Multi-Point Data	Shear Stress vs. Shear Rate (ISO 11403-1)Specific Volume vs Temperature (ISO 11403-2)Viscosity vs. Shear Rate (ISO 11403-2)
Part Marking Code (ISO 11469)	POM-I
Resin ID (ISO 1043)	POM-I

Physical	Nominal Value	Unit	Test Method
Density	1.37	g/cm3	ISO 1183
Melt Mass-Flow Rate (MFR)	6.0	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)	0.262	in3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.5	%
Flow	1.3	%
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness			ISO 2039-2
M-Scale	69
R-Scale	116

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	305000	psi	ISO 527-2
Tensile Stress (Yield)	7980	psi	ISO 527-2
Tensile Strain (Yield)	20	%	ISO 527-2
Nominal Tensile Strain at Break	25	%	ISO 527-2
Flexural Modulus	290000	psi	ISO 178
Flexural Stress (3.5% Strain)	7980	psi	ISO 178
Poisson's Ratio	0.40		ISO 527
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	3.8	ft·lb/in2
73°F	7.1	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	71	ft·lb/in2
73°F	No Break

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	277	°F	ISO 75-2/B
264 psi, Unannealed	172	°F	ISO 75-2/A
CLTE			ISO 11359-2
Flow	6.1E-5	in/in/°F
Transverse	6.7E-5	in/in/°F
Annealing Temperature	320	°F
Annealing Time - Optional	30.0	min/mm

Flammability	Nominal Value	Unit	Test Method
Burning Rate 2 (0.0394 in)	< 3.9	in/min	ISO 3795
FMVSS Flammability	B		FMVSS 302

Fill Analysis	Nominal Value	Unit	Test Method
Melt Density	1.15	g/cm3
Additional Information	Nominal Value	Unit	Test Method
Emission	< 2.00	mg/kg	VDA 275

Injection	Nominal Value	Unit
Drying Temperature	176	°F
Drying Time - Desiccant Dryer	4.0 to 8.0	hr
Suggested Max Moisture	0.050	%
Processing (Melt) Temp	392 to 410	°F
Melt Temperature, Optimum	401	°F
Mold Temperature	104 to 140	°F
Mold Temperature, Optimum	122	°F
Holding Pressure	8700 to 11600	psi
Drying Recommended	yes
Hold Pressure Time	7.50	s/mm
Extrusion	Nominal Value	Unit
Drying Temperature	167 to 185	°F
Drying Time	2.0 to 4.0	hr
Suggested Max Moisture	0.050	%
Melt Temperature	383 to 401	°F
Extrusion Melt Temperature, Optimum	392	°F

Products

Products

Delrin? 300TE BK602

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service